DAB JETCOM SP 102 M

The DAB JETCOM SP 102 M Single Phase is a Self-priming centrifugal pump with excellent suction capacity even when there are air bubbles. Suitable for use with water containing small sand impurities. Particularly suitable for water supply in domestic installations: movimentation of aggressive water in general containing (water for swimming pools).

Additional Information:

Pump body in technopolymer. Motor support, seal in STAINLESS STEEL AISI 316. Mechanical seal in carbon/ceramic. Shaft with rotor in STAINLESS STEEL AISI 316 . Impellers, diffuser, venturi tube and sand guard in technopolymer. Adjustment rings in stainless steel. Continuous duty asynchronous motor. Built-in thermal and current overload protection and a capacitor permanently on in the single-phaseversion. Protection for the three-phase version is the responsibility of the user.

Motor protection level : IP 44
Terminal board protection level : IP 55
Insulation class : F
Standard voltage : 220/240V - 50 Hz single-phase 230/400V - 50 Hz three-phase
Operating range : from 10 to 80 l/min. with head up to 58 m.
Pumped liquid : clean, free from solids and abrasive substances, water coming from swimming pools (containing chlorine).
Liquid temperature range : From 0°C to +35°C for domestic use (EN 60335-2-41) From 0°C to +40° C for other uses.
Maximum ambient temperature : +40°C
Maximum operating pressure : 6 bar (600 kPa)
Installation : fixed or portable in horizontal position