Details
AISI 304 5” submersed multistage centrifugal electric pumps suitable for moving clear water from wells, cisterns and primary collection reservoirs, pressure boosting domestic plants, small-scale irrigation, washing vehicles and general pressure increases. Equipped with twin mechanical seal with interposed oil chamber. Supplied with 20 m of H07 RN-F power supply cable. Single phase version with float on request. Available in the 230V ±10% 50Hz three phase version. Installation: in horizontal and vertical position
Specifications
- Maximum working pressure: 10 bar
- Maximum temperature of the liquid: 40°C
- Maximum immersion:20m (10m with float)
Materials
- External casing, motor coer, seal housing disc, filter and closing ring in AISI 304
- Impeller, nozzel and spacer in PPO reinforced with fibreglass
- Shaft in AISI 231
- Upper mechanical seal (motor side) in Carbon/Ceramic/NBR and lower (pump side) in SiC/Carbon/NBR
Technical Data
- 2 Pole self-ventilated asynchronous motor cooled via the moving liquid.
- Class of insulation F
- IP68 protection rating
- Permanent capacitor instered and thermo-ampermometic protection with automatic rearm incorpirated for the single phase motor.
- G11/4
