Details
Applications
- Hot water recirculation
- Boiler feeding
- Solar panel heating systems
Specifications
- Flow Rate: up to 1m3/h
- Head: up to 3m.
- Maximum operating pressure: 10 bar (pn10).
- Rotor assembly group: made of stainless steel/composite material/carbon.
Motor
- Permanent magnets EC (Electronically commuted) type motor with spherical rotor/stator.
- Wet rotor with a single ceramic/carbon ball bearing.
- Integrated motor protection; no external protection required.
- Single-phase 230v 50Hz power supply.
- Single speed 2-pol motor. Capacitor integrated in the terminal board.
- Protection class: IP 44
Series Characteristics
- Electric circulator pumps with in-line suction and discharge ports, designed for direct installation onto piping, with threaded connections.
- The design is based on the spherical rotor/stator technology.
- Blockage free rotor: the spherical motor principle does not require a manual unblocking device thanks to the small touching surface of the bearing on the ball.
- Automatic regulation by setting a single selector switch placed on the motor housing. This ensures considerable energy savings and a low noise level during operation. The control adapts the pump sleeplessly and automatically to the system requirements, i.e the running speed varies automatically based on load fluctuations.
- The green LED in the transparent Knob gives information about the operational stays of the pump.
Advantages
- Energy saving
- Blockage Free
- Minimal maintenance
- Easy and quick installation
- Noise reduction.
