Pumps UK banner

£775.00

PUK 1LEV Pressurisation unit.

Quick Overview

PUK1EV Single pump wall mounted pressurisation unit with 3.4 Bar filling pump with electronic controls.


Check the datasheets in the downloads tab below for comprehensive information
View Detail
OR

Details

General

Cabinet Overall Dimensions  382* (width) x 600 (height) x 280 (depth)*-Allow additional 35mm width for connections.

Weight 
1EV - 21 kg (empty) 29 kg (full)   
2EV - 27 kg (empty) 35 kg (full)

Connections 
     Inlet  ½” BSP (Male) 
     Overflow 28mm compression 
     Outlet  15mm compression 
     Mains  3-core cable (0.75mm)  
     0.5m flying lead via M20 cable gland

Operating Pressure Range - 0.7 - 3.0 bar

Maximum Flow Rate - 6 litres/min

Tank Capacity (actual)  - 7.6 litres

Features     
     Electronic Module (see below) 
     Isolating Valve (between tank and pump) 
     Non-return valve 
     Corrosion resistant brass/copper/plastic pipework

Electronic Module Features    
     Pump Cycle Count 
     Pump Hours run 
     Volume of Water Introduced (with Alarm) 
     Water Tank Low Level cut out 
     Pump Duty run 
     Pump Failure Detection 
     High and Low Pressure, and General Alarm volt free  
     relays

Enclosure
     IZ coated steel, 0.9mm/1.2mm 
     Powder coated – white/grey 
     Suitable for wall-mounting (bracket included)

Pump Details

Maximum Pressure - 3.4 bar (@ 0.1 l/min flow)

Electrical - 230v 50/60Hz 2.8A run current 
                9A start current


Product Attachments

View FilePUK1 Datasheet    Size: (170.76 KB)