15 Litre Dosing pot - Stainless steel

Quick Overview

  • Product Code: DP 15
  • Max. Working Pressure: 10 Bar
  • Tested to: 21 Bar
  • A - 320mm
  • B - 570mm
  • C - 1022mm
  • D - 220mm
Check the datasheets in the downloads tab below for comprehensive information before you order
Please ensure you are ordering the correct pump/phase as restocking charges may apply. Please call us on 01322 292 415 to check current delivery times.
Excl. Tax: £224.00 Incl. Tax: £268.80
View Detail


The 15 litre dosing pot from Fabricated Products is required in order to feed liquid chemicals such as corrosion inhibitors into closed systems. The dosing pot itself consist of a stainless steel vessel with inlet (return) and outlet (flow) valves, a drain valve and a filling valve.



  • Isolate pot: close all valves
  • Drain pot: open valves A and D
  • Charge pot: close valve D and introduce solution via valve A (tundish)
  • Expel air: open air vent until solution appears
  • Inject treatment: close valve A fully and open valves B and C.
  • The dosing pot may reach temperatures up to 120 degrees centigrade.
  • Protection or warnings should be applied to ensure that personnel do not come into contact with the pot so as to avoid burns.
  • A check valve is installed to prevent accidental scolding and chemical saturation (blow back) of personnel operating the dosing pot.


  • Stainless Steel Shell
  • Valve size 25mm BSP female for all dosing pots
  • Welded to BS EN 287
  • All dosing pots that are designed to PD 5500:2009 category 3 (C E marked) have the following Max. Working pressures:
    • 14 bar-3.5 litres to 6 litres inclusive
    • 10 bar- 10 litre to 20 litres inclusive
    • 8 bar-25 litres
  • Matt Stainless Steel finish

Product Attachments

View FileSS Chemical dosing pot datasheet    Size: (264.39 KB)