5 Litre Dosing pot - Stainless steel

Quick Overview

  • Product Code: DP 5
  • Max. Working Pressure: 14 Bar
  • Tested to: 21 Bar
  • A - 265mm
  • B - 355mm
  • C - 810mm
  • D - 165mm
Check the datasheets in the downloads tab below for comprehensive information before you order
Please ensure you are ordering the correct pump/phase as restocking charges may apply. Please call us on 01322 292 415 to check current delivery times.
Excl. Tax: £191.00 Incl. Tax: £229.20
View Detail


The 5 litre dosing pot from Fabricated Products is required in order to feed liquid chemicals such as corrosion inhibitors into closed systems. The dosing pot itself consist of a stainless steel vessel with inlet (return) and outlet (flow) valves, a drain valve and a filling valve.



  • Isolate pot: close all valves
  • Drain pot: open valves A and D
  • Charge pot: close valve D and introduce solution via valve A (tundish)
  • Expel air: open air vent until solution appears
  • Inject treatment: close valve A fully and open valves B and C.
  • The dosing pot may reach temperatures up to 120 degrees centigrade.
  • Protection or warnings should be applied to ensure that personnel do not come into contact with the pot so as to avoid burns.
  • A check valve is installed to prevent accidental scolding and chemical saturation (blow back) of personnel operating the dosing pot.


  • Stainless Steel Shell
  • Valve size 25mm BSP female for all dosing pots
  • Welded to BS EN 287
  • All dosing pots that are designed to PD 5500:2009 category 3 (C E marked) have the following Max. Working pressures:
    • 14 bar-3.5 litres to 6 litres inclusive
    • 10 bar- 10 litre to 20 litres inclusive
    • 8 bar-25 litres
  • Matt Stainless Steel finish

Product Attachments

View FileSS Chemical dosing pot datasheet    Size: (264.39 KB)