Cleanvent 50mm Air & Dirt Separator

Quick Overview

  • Model No: SS CVAD-50
  • Tested to: 21 bar
  • Dimensions (mm)
    A - 50/ B - 430/ C - 300/ D - 170/ E - 25/ F - 380/ G - 680
  • 1 - High capacity auto air vent
  • 2 - Way valve / Bleed valve
  • 3 - Drian valve
Check the datasheets in the downloads tab below for comprehensive information before you order
Please ensure you are ordering the correct pump/phase as restocking charges may apply. Please call us on 01322 292 415 to check current delivery times.
Excl. Tax: £484.00 Incl. Tax: £580.80
View Detail


The 50mm SS Cleanvent combines the removal of Air, Dirt and Sludge. Installed on the flow pipe (heating) or return pipe (chilled water) in the system. The 50mm SS Cleanvent (SS CVAD) will eliminate these microbubbles and all types of Dirt and Sludge from heating and chilled water systems down to 10 micron.

Features and Benefits

  • Greatly reduced commissioning times after initial fill.
  • Longer system life (through air and dirt elimination)
  • Low-pressure drop
  • Bi-directional flow
  • Maximum Temperature. 110 °c. Higher temperature units available on request.
  • Tested to 21 bar
  • All stainless steel construction.
  • The same valve is used for releasing air when filling the system
  • Large collector ensures that flushing is only required now and then
  • Maximum flow rate up to 3m/sec

Product Attachments

View FileCleanvent de-aerator datasheet    Size: (126.38 KB)