ABS AS0530.125-S17/2-D01*10-M

Quick Overview

  • Old Code: 06085400
  • New Code: GM1613313111111
  • AS - Product range
  • 05 - Discharge outlet DN (cm)
  • 30 - Hydraulic number
  • S - Modular motor version
  • 17 .- Motor power P2 kW x 10
  • 2 - Number of poles
  • D01 - Three phase 400V
  • 10 - 10 meter cable
Check the datasheets in the downloads tab below for comprehensive information before you order
Please ensure you are ordering the correct pump/phase as restocking charges may apply. Please call us on 01322 292 415 to check current delivery times.
Excl. Tax: £769.00 Incl. Tax: £922.80

* Required Fields

Excl. Tax: £769.00 Incl. Tax: £922.80
View Detail


The AS0530.125-S17/2-D01*10-M from ABS is a robust, reliable submersible pump from 1 to 3 kW for pumping clear water, wastewater and sewage from buildings and sites in domestic and commercial areas.


Technical Data

  • Max solids size: 40mm
  • Discharge: G2"
  • Rated voltage: 400 3~
  • Motor power: P1 - 2.31kW, P2 - 1.7kW
  • Rated current: 3.97A
  • Speed: 2900 r/min
  • Weight: 34kg 


  • AS submersible pumps have been designed for the economic and reliable pumping of wastewater and sewage, and can be used with automatic coupling system for fixed applications or as portable units.
  • The 2-inch version is especially suitable for pumping wastewater from underground garages.
  • With vortex hydraulics the AS is particularly suitable for fluids containing fibrous or abrasive matter and for sewage.
  • The Contrablock hydraulic system is suitable for larger proportions of solid or fibrous matter.
  • Maximum allowable temperature of the medium is 40 °C, or short term to 60 °C (max. 5 minutes).


  • Hydraulic design with Contrablock system or vortex impellers.
  • High reliability even under long term operating conditions.
  • For wastewater and sewage containing solid or fibrous particles.
  • In standard or Ex-versions.
  • Option of automatic seal and temperature monitoring. Ex version with temperature monitoring as standard.
  • Available for transportable or fixed installation.


  • Motor Housing - Cast iron EN-GJL-250
  • Rotor Shaft - Stainless steel 1.4021 (AISI 420)
  • Volute - Cast iron EN-GJL-250
  • Impeller - Cast iron EN-GJL-250
  • Bottom plate - Cast iron EN-GJL-250
  • Fasteners - Stainless steel 1.4401 (AISI 316)

Temperature monitoring

  • TCS (Thermo-Control-System) with thermal sensors in the stator to switch off the pump in the case of overheating and switch on automatically after cooling down (option on standard AS).

Product Attachments

View FileABS AS Data Sheet    Size: (831.35 KB)