ABS Sanimat-1000-HD-D01*4-X

Quick Overview

  • Three Phase
  • Discharge connection - Sleeve 4” DN 100 
  • Motor power (kW) 
    From Mains = 2.88, From Motor Shaft = 2.20
  • Speed (r/min) - 1450 
  • Rated voltage (V) -400 
  • Rated current (A) - 5.2 
  • Cable length (m) - 4 + 1.5 
  • Weight (kg) - 57
Check the datasheets in the downloads tab below for comprehensive information before you order
Please ensure you are ordering the correct pump/phase as restocking charges may apply. Please call us on 01322 292 415 to check current delivery times.
Excl. Tax: £2,393.00 Incl. Tax: £2,871.60
View Detail


The Sanimat 1000-HD-D01*4-X from ABS is a faecal lifting station for the removal of wastewater and sewage from areas below sewer level. Ideal for effective dewatering of houses with one or two living units and for new buildings or renovation of old building.


  • Tank - Polyethylene
  • Motor Housing - Cast iron EN-GJL-250
  • Rotor Shaft - Stainless steel 1.4021 (AISI 420)
  • Volute - Polyethylene
  • Impeller - Cast iron EN-GJL-250


  • Corrosion resistant, gas- and odour-tight in accordance with EN 12050-1. 
  • Supplied as standard with pump, automatic level control and control box, non-return valve, 4” sleeve and flange. 
  • Capacity: 70 litres


  • Water pressure sealed, squirrel cage 4-pole induction motor, with triple shaft seals and oil chamber. 
  • Electronic monitoring of stator temperature and overcurrent.
  • Insulation: Class F for 155 °C
  • Protection type: IP 68


  • Plug-in unit with earthed plug (230 V) or CEE plug (400 V) and phase sequence changeover facility.
  • Easily transported and fitted. Compact dimensions allow passage through a standard door opening.
  • Dynamic pressure level sensor on the tank, with separate sensors for inflow level and high water alarm.
  • Four horizontal inlet ports (2 x DN 100, 2 x DN 70) and two vertical (1 x DN 100, 1 x DN 150). Vertical vent line DN 70. DN 40 port is suitable for the connection of a hand membrane pump.
  • DN 100 horizontal inlet ports are at different levels (180 and 220 mm) allowing for flexible installation connection.
  • Direct toilet connection possible in the case of wall-mounted WC units.
  • Discharge flange DN 80, plus flanged socket with 4” sleeve and clips (for discharge pipe DN80/100).
  • Built-in mains alarm (visual and acoustic), can be converted to mains-independent by inserting battery

Product Attachments

View FileABS Sanimat datasheet    Size: (552.42 KB)