ABS Sanimat 1002-HD-D01*4-X

Quick Overview

  • Three Phase
  • Discharge connection - Sleeve 4” DN 100 
  • Motor power (kW)
    From Mains = 2.88, From Motor Shaft = 2.20
  • Speed (r/min) - 1450 
  • Rated voltage (V) - 400 
  • Rated current (A) - 5.2
  • Cable length (m) - 4 + 1.5 
  • Weight (kg) - 117
Check the datasheets in the downloads tab below for comprehensive information before you order
Please ensure you are ordering the correct pump/phase as restocking charges may apply. Please call us on 01322 292 415 to check current delivery times.
Excl. Tax: £3,799.00 Incl. Tax: £4,558.80
View Detail


The Sanimat 1002-HD-D01*4-X twin pump with a three phase pumping station from ABS is for the removal of wastewater and sewage from areas below sewer level. Ideal for effective dewatering of houses with one or two living units and for new buildings or renovation of old building.


  • Tank - Polyethylene
  • Motor Housing - Cast iron EN-GJL-250
  • Rotor Shaft - Stainless steel 1.4021 (AISI 420)
  • Volute - Polyethylene
  • Impeller - Cast iron EN-GJL-250


  • Synthetic, corrosion-resistant, gas- and odour-tight tank, in accordance with EN 12050-1. 
  • Supplied as standard with pumps, automatic level control and control box, non-return valves,
  • 4” sleeve and flange.
  • Capacity: 140 litres


  • Water pressure sealed, squirrel cage 4-pole induction motor, with triple shaft seals and oil chamber. 
  • Electronic monitoring of stator temperature and overcurrent.
  • Insulation: class F for 155 °C
  • Protection type: IP 68


  • Plug-in unit with CEE plug and phase sequence changeover facility.
  • Easily transported and fitted. Compact dimensions allow passage through a standard door opening.
  • Dynamic pressure level sensor on the tank, with separate sensors for inflow level and high water alarm.
  • Five horizontal inlet ports (4 x DN 100, 1 x DN 150) and three vertical (2 x DN 100, 1 x DN 150). Vertical vent line DN 70. Two small diameter ports (DN 40/50) suitable only for wastewater.
  • DN 40 is suitable for connection of a hand membrane pump.
  • Discharge flange DN 80, plus flanged socket with 4” sleeve and clips (for discharge pipe DN80/100).
  • Integrated valve system consisting of two ball-type, non- return valves.
  • Two pumps; very quiet thanks to 4-pole, slow-running motors.
  • Direct toilet connection possible in the case of wall-mounted WC units.
  • Sloping container floor prevents deposits.
  • Built-in mains alarm (visual and acoustic), can be converted to mains-independent by inserting battery.

Product Attachments

View FileABS Sanimat datasheet    Size: (552.42 KB)