ABS Sanimat 2002D-HD-D01*4-X

Quick Overview

  • Three Phase
  • Discharge connection - Sleeve 4” DN 100 
  • Motor power (kW) 
    From Mains = 2.88, From Motor Shaft = 2.20
  • Speed (r/min) - 1450 
  • Rated voltage (V) -400 
  • Rated current (A) - 5.2 
  • Cable length (m) - 4 + 1.5 
  • Weight (kg) - 132
Check the datasheets in the downloads tab below for comprehensive information before you order
Please ensure you are ordering the correct pump/phase as restocking charges may apply. Please call us on 01322 292 415 to check current delivery times.
Excl. Tax: £3,871.00 Incl. Tax: £4,645.20
View Detail


The Sanimat-2002D-HD-D01*4-X is a twin pump with a three phase pumping station from ABS, supplied with a 320 litre tank for the removal of wastewater and sewage from areas below sewer level. Ideal for effective dewatering of houses with one or two living units and for new buildings or renovation of old building.


  • Tank - Polyethylene
  • Motor Housing - Cast iron EN-GJL-250
  • Rotor Shaft - Stainless steel 1.4021 (AISI 420)
  • Volute - Polyethylene
  • Impeller - Cast iron EN-GJL-250


  • Synthetic, corrosion-resistant, gas- and odour-tight tank in accordance with EN 12050-1. 
  • Supplied as standard with pumps, junction piece with integral non-return valve system and cleaning openings, 4” sleeve and flange, automatic level control and control panel.
  • Capacity: 320 litres


  • Water pressure sealed, squirrel cage 2- and 4-pole induction motor, with triple shaft seals and oil chamber. 
  • Electronic monitoring of stator temperature and overcurrent.
  • Insulation: class F for 155 °C, protection type IP 68


  • Plug-in unit with CEE plug and phase sequence changeover facility.
  • Easily transported and fitted. Compact dimensions allow passage through a standard door opening.
  • Dynamic pressure level sensor on the tank, with separate sensors for inflow level and high water alarm.
  • Vortex impeller with large free passage for reliable pumping of both faecal and faecal-free sewage.
  • Option of 2- or 4-pole motors.
  • Direct toilet connection possible in the case of wall-mounted WC units.
  • One variable inlet (DN 150) with 90° elbow, two horizontal (DN 150), and five vertical (2 x DN 100/150, 2 x DN 70, 1 x DN 40). One DN 70 port is needed as a vent line. DN 40 port is suitable for the connection of a hand membrane pump.
  • Discharge flange DN 80, plus flanged socket with 4” sleeve and clips (for discharge pipe DN80/100).
  • Sloping container floor prevents deposits.
  • Integrated valve system consisting of two ball-type, non-return valves.
  • Built-in mains alarm (visual and acoustic), can be converted to mains-independent by inserting battery.

Product Attachments

View FileABS Sanimat 2002 Pumps UK Data Sheet    Size: (710.6 KB)