ABS Sanimax MF154 HW W01*10 UKP

Quick Overview

  • Part No: 07565225
  • Pump: MF 154 Hot Water Pump
  • Phase: Single phase, 230V
  • Cable Length: 10m
  • Weight: 13.5 Kg
  • In Stock
Check the datasheets in the downloads tab below for comprehensive information before you order
Please ensure you are ordering the correct pump/phase as restocking charges may apply. Please call us on 01322 292 415 to check current delivery times.
Excl. Tax: £550.00 Incl. Tax: £660.00
View Detail


The Sanimax MF154 HW W01*10 UKP wastewater pumping unit from Sulzer ABS is suitable for installation at floor level, and is fitted with an MF-HW hot water pump. The Sanimax MF154 HW is suitable for the removal of high temperature liquids containing solid particles up to 20 mm.


  • Ready-for-use, plug-in unit with Schuko plug.
  • Compact triangular design optimises space.
  • Fitted with MF 154HW pump, complete with non-return valve and level control. A separate check valve should be used at heads over 3m.
  • Solids handling up to 20 mm.
  • Pumping of high temperature wastewater up to a maximum of 80 °C.
  • Seven ports (5 x 40 mm, 2 x 50 mm), ready-prepared with seals, which can be used for inflow, discharge, power cable, or flexible hose connection to a washing machine (¾” adaptor supplied).
  • Odour-tight lid with odour lock and venting, including charcoal odour filter and overflow protection.


  • Motor power: P1 = 0.65kW, P2 = 0.42kW
  • Speed: 2900r/min
  • Rated voltage: 220-240V 1~
  • Rated current:2.83A
  • Cable type: 3G1.0H07RN-F, enhanced version


  • Upper Lid: Stainless steel 1.4301
  • Motor Housing: Cast iron EN-GJL-250
  • Rotor Shaft: Stainless steel 1.4021
  • Impeller: Polyamide
  • Volute: Cast iron EN-GJL-250
  • Seal: Neoprene
  • Fasteners: Stainless steel 1.4401

Product Attachments

View FileABS Sanimax MF154 Hot Water    Size: (221.3 KB)