DAB Pulsar 50/50 M-NA

Quick Overview

  • Pulsar 50/50 M-NA: Without Float
  • Code: 104160070
  • Voltage: 1x230 V~
  • P1 max: 1.45kW
  • P2 Nominal:1kW, 1.36HP
  • Amp: 6.5A
  • Outlet: 1¼" G
  • Weight: 18kg
Check the datasheets in the downloads tab below for comprehensive information before you order
Please ensure you are ordering the correct pump/phase as restocking charges may apply. Please call us on 01322 292 415 to check current delivery times.
Excl. Tax: £393.00 Incl. Tax: £471.60
View Detail
OR

Details

The Pulsar 50/50 M-NA 5" multistage pump from DAB pumps, which is very silent running, can be installed inside boreholes and sumps and eliminates all potential problems of suction and unpriming. Multi-stage close-coupled borehole pump with hydraulic section below motor, which is cooled by the pumped liquid.

 

Submersible with continuous duty asynchronous motor. Rotor running on ball bearings, oversized to ensure low noise and durability. Built-in thermal and current overload protection and a capacitor permanently on in the singlephase version. To protect the three-phase motor use remote overload cut-outs in compliance with statutory regulations.

 

Features

  • Constructed in compliance with CEI 2-3 and CEI 61-69 (EN 60335-2-41) standards.
  • Operating range: from 0.9 to 7.2 m3 /h with head up to 86 metres.
  • Maximum permissible sand quantity: 50 g/m3.
  • Motor protection level: IP 68.
  • Insulation class: F.
  • Liquid temperature range: From 0° C to +40° C.
  • Standard cables: 20 m HO7 RN F cable type.
  • Cable complete with SCHUKO plug EEC 7-VII-UNEL 47166-68 for the single-phase version.

Product Attachments

View FilePulsar    Size: (753.79 KB)