IMP NMT MAX 50/120 F280 (1~ 230V)

Excl. Tax £895.00 Incl. Tax £1,074.00
In Stock and Ready to Ship
SKU
979523869
  • SKU: 979523869
  • Manufacturer: IMP Pumps
  • Name: NMT MAX 50/120 F280
  • Length 280mm
  • Connection: PN 6/10
  • Frequency: 50/60 Hz
  • PMAX (W): 560
  • Voltage: 1~ 230 V 50Hz
  • Max Temperature: 110

The IMP NMT MAX is an electronically controlled high-efficiency flanged pump for heating, air conditioning, cooling and sanitary water. The NMT (new motor technology) circulating pumps are used for the transfer of liquid medium within systems for hot-water heating, air-conditioning and ventilation. They are designed as single or twin variable-speed pumping aggregates where the speed is regulated by electronic device. The pump constantly measures pressure and flow and adjusts the speed according to the set pump mode.

Electronically controlled wet running circulating pump: For all heating systems, air conditioning, closed cooling circuits and industrial systems, used in accordance with VDI 2035.

  • ECM permanent magnet technology with high energy efficiency
  • LED display for control
  • built-in electric protection
  • easy handling and instalation, low noise operation and automatic venting
  • Automatic operation
  • Night mode
  • robust and compact construction for long life
  • NMT MAX – remote on/off, status relay feedback
  • NMT MAX C – upgrade with NMTC communication module (option): Ethernet, Modbus RTU, analog control input 0-10V, 3 analog inputs/outputs, 1 rele output.

Permissible mediums Water, mixed with glycol, parameters must be checked in the mixture of water with over 20% of glycol. Pure, non-explosive liquid media free of mineral oils and solid particles. Medium temperature from – 10 °C to + 110 °C, ambient temperature with max. surroundings temperature 40 °C.

  • Part Number: 979523869
  • Power Supply: 1~230 V
  • Declared Protection: IP44
  • Q max: 37.4 m3/h
  • H max: 12.5 m
  • RPM: 4200 1/min
  • Motor Power: 560 w
  • Declared Current: 2.5 A
  • Fluid: Water VDI 2035, glycol
  • 40%
  • Fluid Temperature: -10.0 ÷ 110.0 °C
  • Insulation Class: H
  • DN: 50 mm
  • Connector: PN 6/10
  • Net Weight: 13.70 kg
  • Length: 280 mm
  • Approvals: CE EAC
  • EEI: 0.2
  • Efficiency: 59.52 %
  • Impeller Material: PES GF 30
  • Bearing Material: Graphite
  • Shaft Material: AISI 420
  • Hydraulic Materials: Gray cast iron
  • Mains Frequency: 50/60 Hz
  • Connection: PN 6/10
  • Max Pressure: 1.0 MPa
  • Ambient Temperature Range: 40 deg C