Jung Pumpen Simer 5 - Low Suction Submersible Utility Pump (1~ 230V)

Excl. Tax £221.11 Incl. Tax £265.33
Direct from Supplier - Normally 2-3 Working Days

This is the Simer 5 the replacement for the Simer 4.

  • SKU: OD6601UK-05
  • Old SKU: 0D6601UK-05, OD6601G-04, OD6601G-03, OD6601G-02, OD6601G-01, OD6601G
  • Max Head (Hmax): 6m
  • Qmax = 4.3 m3/h
  • Max Flow Rate: 1.05 l/s
  • Discharge Size: 1/2", 3/4", 1"
  • Power Supply: 1~ 230V
  • Removes water down to a level of 2 mm
  • Anti Airlock valve
  • Variable hose connector
  • Cast aluminium housing

An optional part (JP46884) is available to convert this manually controlled pump to automatic control.

The Jung Pumpen Simer 5 (230V) is a robust submersible utility pump for draining cellars, flat roofs, tennis courts or swimming pools. It can also be used to remove wastewater from building works such as core-hole drilling and concrete cutting.

The Simer pump removes unwanted water quickly and efficiently, leaving a residual water level of just 2mm, while starting to pump at a water level of just 5mm!

The removable strainer, with a mesh size of 2mm, reliably protects the hydraulic system from coarse solids. The variable hose connector allows connections to be made quickly and easily.

Connecting the pump permanently to the building’s drainage system or using it to protect against back-flow is not permitted, however. Please refer to our U3K to U6K range of pumps for these types of application.

The optional Simer Level Control (electronical switch) can be integrated into the cable inlet and switch the pump on automatically at approx. 7 mm water level. This way, puddles and flood water are removed automatically. The pump is manually controlled as standard.

Note: Dry running of the pump (operation without pumped medium) over a period of more than 20 minutes must be avoided.

  • Removes water down to a level of 2mm
  • Self-venting starts at a water level of just 5mm
  • Anti Airlock valve
  • Variable hose connector
  • Robust cast aluminium housing
  • Cooling jacket for motor housing
  • Replaceable cable inlet
  • 1/2", 3/4" or 1" Hose connection
More Information
IP RatingIP68