Lowara e-LNEH in-line pumps

Quick Overview

Lowara e-LNEH in-line pumps. For Heating, Air Conditioning and Hot Water Circulation. The new Lowara e-LNE Series is the result of the close collaboration between our customers and us; the new range has been redesigned and improved to meet the Commercial Building Services (CBS) requirements, in terms of performances and energy saving.
Check the datasheets in the downloads tab below for comprehensive information before you order
Please ensure you are ordering the correct pump/phase as restocking charges may apply. Please call us on 01322 292 415 to check current delivery times.


Pump design

The new Lowara e-LNE Series is a single-impeller centrifugal pump with in-line suction and delivery flanges. The e-LNE Series has a “Back pull-out” design (impeller, adapter, and motor can be extracted without disconnecting the pump body from the piping system). The pumps have cast iron casing as standard; the impeller standard material is cast iron but is also available in bronze and stainless steel.

Hydraulic specifications

  • Maximum delivery: 410 m3 /h (4-pole range).
  • Maximum head: 41 m (4-pole range).
  • Hydraulic performance compliant with ISO 9906:2012 – Grade 3B. Grade 2B and 1B available upon request.
  • Fluid temperature range: - standard version (with mechanical seal BQ1EGG-WA and EPDM gasket) -25 to +120 °C - versions on request (depending on mechanical seal and gasket) -20* or -25 to +120 or +140 °C.
  • Maximum operating pressure: - standard version (with mechanical seal BQ1EGG-WA) 16 bar @ 90 °C and 10 bar @ 120 °C - versions on request (with other mechanical seals) 16 bar @ 120 °C and 14,9 bar @ 140 °C

Please review the datasheet in the tab above for more comprehensive information.

Product Attachments

View FileLowara e-LNEH Datasheet    Size: (1.86 MB)