Flamcomat Starter Pump Units

Flamcomat Starter Pump Units

For pressurisation, deaeration and topping up (optional) in sealed heating installations (acc. to EN12828) and chilled water (cooling) installations.

Flamcomats with pump units are used for storage of expansion water, deaeration and topping up your installation automatically as an integrated controlled unit carried out with state of the art micro-electronics. The Flamcomat balanced pressure expansion equipment is sized according to the total system volume and the boiler or chiller load. The Flamcomat Starter vessel is 70% efficient irrespective of the static height of the system.

  • Automatically performs volumetric control and automatic topping-up (optional) during the heating or cooling cycles.
  • Integrated turbo degassing allows for very rapid degassing.
  • The degassing function allows for continuous degassing if desired.
  • Degassing modes: fast, normal or off.
  • The user-friendly control unit displays all operating and error conditions in a comprehensible and convenient way.
  • Advanced technology ensures low power consumption, long service life and easy maintenance.
  • Operating modes: single (mono), automatic change-over or load dependent (duo).
  • Microprocessor control, self-learning, with graphical display and RS 485 interface.
  • 20 languages can be selected in the menu of the SPC controller (eg: D, GB, NL and F).
  • Due to the hydraulic design of the Flamcomat Starter and the connection sets the vessel can be positioned anywhere around the Flamcomat pump units.
  • The position of the second pump on a double pump Flamcomat Starter can positioned on either side.

4 Items

Set Descending Direction
per page
View as Grid List

4 Items

Set Descending Direction
per page
View as Grid List