KSB Mini-Compacta U1.60 D/C

Quick Overview

  • Mini - Small package unit
  • Compacta - Type series
  • U - Single pump lifting unit
  • 1 - Hydraulics code
  • 60 - Total volume of collecting tank (litres)
  • D - Three phase motor (3~ 400V)
  • C - Variant for aggressive fluids
  • Part No - 29131512
Check the datasheets in the downloads tab below for comprehensive information before you order
Please ensure you are ordering the correct pump/phase as restocking charges may apply. Please call us on 01322 292 415 to check current delivery times.


The Mini-Compacta U1.60 D/C from KSB is for the disposal of waste water occurring below the flood level in buildings or parts of buildings. Also for waste water management and the Single-pump unit is periodically used in a single-family house


Product benefits

  • The control system (LevelControl) ensures safe and reliable operation.
  • Check valve ensures low-noise pump operation and normal, uninterrupted operation during maintenance work.
  • Various positioning options and diameters make it easy to adapt the unit to the most complicated of site conditions.
  • Collecting tank with optimum volume/footprint ratio for effective space utilisation
  • Integrated, ergonomically designed grips for safe handling during transport and installation

Fluids handled

  • Waste water with faeces
  • Faecal-free waste water
  • Grey water
  • Aggressive fluids


  • Standard design with free-flow impeller (single-pump unit)
  • 50 Hz
  • Standard design with integrated check valve, with free passage of 40 mm
  • Floodable sewage lifting unit 78) to EN 12050-1
  • 2800 rpm
  • Ready-to-connect sewage lifting unit
  • Gas and water-proof plastic collecting tank, pump unit, sensors and control unit
  • Impeller end - Mechanical seal
  • Drive end - Shaft seal ring
  • An oil reservoir, which is supplied filled with ecologicallyacceptable white oil, is fitted between the impeller-end and drive-end shaft seals.
Scope of delivery
  • Gas, odour and water-proof collecting tank made of impact-resistant plastic
  • Fully floodable submersible motor pump
  • Flexible hose connection and hose clips DN 100 (inlet)
  • Flexible hose connection and hose clips (venting)
  • Flexible hose connection and hose clips for discharge pipe, consisting of DN 80 flanged coupling with DN 100 hosetail, fabric-reinforced rubber hose and adapter hose for outside pipe diameter of 108 - 114.3 mm
  • Flexible hose connection and hose clips (hand diaphragm pump)
  • Check valve with full port and lifting screw
  • Analog level sensor for pump and alarm buzzer
  • Electronic control unit with integrated alarm and charging circuit, with high-quality rechargeable battery and alarm buzzer


  • Tank - Polyethylene
  • Pump casing - Polyethylene
  • Impeller -  PBT-GF
  • Motor shaft - Stainless steel (1.4462)
  • Casing cover - Stainless steel (1.4408)
  • Check valve - Stainless steel (1.4408)
  • Float - Polypropylene
  • Screws, bolts and nuts - Stainless steel (A4)

Product Attachments

View FileMini-Compacta Range Datasheet    Size: (3.08 MB)