PUK Q Switch Quiet Water Booster Pump

Quick Overview

  • Voltage: 230v Single Phase
  • Current: 6 Amps. 0.75kW
  • Connections: Inlet 1¼” BSPF. Outlet 1” BSPF
  • The unit has a noise level of 65 db ± 2.5%

See below for more

Check the datasheets in the downloads tab below for comprehensive information before you order
Please ensure you are ordering the correct pump/phase as restocking charges may apply. Please call us on 01322 292 415 to check current delivery times.
Excl. Tax: £695.00 Incl. Tax: £834.00
View Detail


The PUK-Q Switch quiet water booster has been developed for the large domestic and light commercial markets. The pump itself has an enclosed motor that greatly reduces the running noise.


The pump also has a very small foot print that suits being installed next to its break tank or un-vented cylinder. We set the units to work between pressures of 5 to 3.5 bar which will give a flow rate of 60 l/m.

The Q Switch unit comes with a 20 litre WRAS approved vessel, suction and discharge valves and steel base plate.


All units are tested before they leave our factory. The pump must be fitted below the break tank so that the pump is primed fully and permanently.


Optional add ons

  • Low water cut out switch with junction box. 
  • A pressure reducing valve so that the outlet pressure is kept at 3 bar. 
  • An anti-vibration kit with foot mounts and stainless steel hoses. 

Product Attachments

View FilePUk Q-Switch Datasheet    Size: (860.55 KB)