PUK Variboost 3-60 Booster

Quick Overview

  • Power supply - 230v Single phase
  • 1“ BSPM Suction - 1” BSPM Discharge
  • 19lit Pressure vessel
  • 1 l/s @ 3 Bar
  • Rated Power - 0.75kW
  • Nominal speed - 2850 1/min
  • Frequency - 50Hz
  • Rated Current - 2.9A

Optional Accessory Kit Includes

  • 2 x 1" Flexible hose with F/F BSP Connections
  • 2 x 1" Nipple
  • 4 x Anti-vibration mounts with bolts and washers
Check the datasheets in the downloads tab below for comprehensive information before you order
Please ensure you are ordering the correct pump/phase as restocking charges may apply. Please call us on 01322 292 415 to check current delivery times.
Excl. Tax: £785.00 Incl. Tax: £942.00

* Required Fields

Excl. Tax: £785.00 Incl. Tax: £942.00
View Detail


The PUK Variboost 3-60 is a variable speed constant pressure booster pump that has been designed to suit systems that have unvented hot water cylinders with pressure reducing valves and high resistance bathroom fittings that require a balanced pressure on hot and cold supply pipes.


The Variboost 3-60 has an inverter designed for water boosting applications with dry running protection. The units have a 19lit. WRAS approved pressure vessel which allows for smooth cut in and ramp down of the pump. The pumps are WRAS approved and will suit potable water applications.


We can offer a pre-commission of the unit so that the installation is made a simple as possible. All that is require is the connections of the pipework and power supply and the pressing of the start button.


The pump should be connected to an adequately sized break tank so that the out let flow rate will not drain the tank when the system is a full flow. To give a 5 minute storage time the minimum size for the tanks is 300lit. (Suggested Size 500lit).


Technical Data

  • Pump type Horizontal Multistage
  • Fluid Water, clean
  • No of pumps/ Reserve 1/0
  • Liquid temperature 293K
  • Flow 1l/s
  • Kin. viscosity 1mm²/s
  • Head 30m
  • Vapour pressure 2.2kPa
  • Static head 0m
  • PH value 7
  • Inlet pressure 10kPa
  • Density 1000kg/m ³
  • Available system NPSH 0
  • Solids Weight % 0
  • Environmental temp. 290K
  • Altitude 1000m

Product Attachments

View FilePUK Variboost Data    Size: (1.38 MB)