Reflex Refix DT 200Lt Flow Through Vessel

Quick Overview

  • Type: DT 200
  • Nominal volume: 200 l
  • Useful volume max.: 150 l
  • perm. operating temp.: 70 °C
  • perm. op. overpressure: 10 bar
  • Gas inlet press ex works: 4 bar
  • Diameter: 634 mm
  • Height: 973 mm
  • Net weight: 37 kg
  • System connection: 2*Rp 1 1/4
  • Nominal flow volume: 7,2 m³/h
  • Colour: green
Check the datasheets in the downloads tab below for comprehensive information before you order
Please ensure you are ordering the correct pump/phase as restocking charges may apply. Please call us on 01322 292 415 to check current delivery times.
Excl. Tax: £1,721.00 Incl. Tax: £2,065.20
View Detail


The Refix DT 200Lt Flow Through Vessel from Relex is the potable water pressure vessel for use with large-scale systems. Water flows through the vessel, thereby meeting the ultra-exacting hygiene requirements of DIN 1988. The wide range of different connections enables the Refix DT to be adapted to any capacity.


  • Built and tested according to DIN 4807 part 5, EN 13831 respectively
  • DIN-DVGW (reg. no. NW 9481AT2534). Approval according to EU
  • Directive 97/23/EC for pressure equipment.
  • Internal circulation by means of high-flow, star-shaped connector and incl. Rp 3/4 T piece
  • Water-bearing parts corrosion resistant
  • Vessel connection made of stainless steel
  • Bladder acc. to KTW-C, W 270
  • Outside/inside coating, inside according to KTW-A
  • Can be mounted with a reflex 'flowjet' flow-through fitting

Product Attachments

View FileReflex Refix Datasheet    Size: (2.19 MB)