Stuart Turner Flomate Mains Boost MBF 12 (1~ 230V)

Excl. Tax £217.90 Incl. Tax £261.48
In stock Direct from Supplier - Normally 2-3 Working Days
SKU
46574
  • Product code: 46574
  • WRAS approval: 1210040
  • Maximum head (closed valve): 3.2 bar
  • Pump connections: G ¾ male

The Flomate Mains Boost from Stuart Turner is an ideal solution for low occupancy properties with typically one bathroom. The Flomate Mains Boost pump is designed to be connected directly to the incoming mains and will deliver an additional 1.5 bar pressure to the existing mains pressure and a maximum flow rate of 12 litres minute.

 

The pump itself will start automatically when a flow rate of 0.6 litres per minute or more exists. It also has a built-in bypass, meaning that when the mains pressure exceeds 1.5 bar, the additional performance is not restricted

 

Features

  • Pump type: Peripheral
  • Mechanical seal: EPDM / PTFE / Al. Oxide
  • Anti vibration feet 
  • Dry run protection 

Materials

  • Pump body: Brass
  • Impeller: Brass

Performance

  • Maximum head (closed valve): 3.2 bar
  • Maximum flow: 12 l/min
  • Maximum working pressure: 600 kPa (6 bar)
  • Maximum ambient air temperature: 40 °C
  • Min / Max water temperature: Min 4 °C / Max 35 °C
  • Flow switch sensitivity (approx): 0.6 l/min

Electrical

  • Power supply/phase/frequency: 230 V a.c./ 1 / 50 Hz
  • Current (full load): 1.5 Amps
  • Power consumption: 340 Watts
  • Fuse rating: 5 Amps
  • Power cable (pre-wired): 1.5 metres