Monsoon Standard Single S3.0 Bar

Quick Overview

  • Product code: 46419
  • WRAS approval: 1404702
  • Pump connections: G ¾ male
  • Maximum head (closed valve): 3.0 bar
Check the datasheets in the downloads tab below for comprehensive information before you order
Please ensure you are ordering the correct pump/phase as restocking charges may apply. Please call us on 01322 292 415 to check current delivery times.
Excl. Tax: £309.00 Incl. Tax: £370.80
View Detail
OR

Details

The Monsoon Standard Single S3.0 bar pump is ideal for boosting a water supply in vented systems. The Monsoon Standard Single S2.0 pump will function under positive head conditions only and are suitable for installation into open vented hot and cold water systems.

 

The Monsoon Standard Single S3.0 bar pump requires a flow of just 0.6 l/min through the outlet to start.

 

Features

  • Pump type: Peripheral
  • Mechanical seal: EPDM / PTFE / Al. Oxide
  • Anti vibration feet 
  • Inlet strainer(s) 
  • Flexible hoses: 2
  • Dry run protection 

Materials

  • Pump body: Brass
  • Impeller: Brass

Performance

  • Maximum head (closed valve): 3.0 bar
  • Performance @ 9 l/min: 2.5 bar
  • Performance @ 18 l/min: 1.6 bar
  • Maximum flow: 33 l/min
  • Maximum static inlet pressure: 14 metres
  • Maximum working pressure: 600 kPa (6 bar)
  • Maximum ambient air temperature: 40 °C
  • Min / Max water temperature: Min 4 °C / Max 65 °C
  • Flow switch sensitivity (approx): 0.6 l/min

Electrical

  • Power supply/phase/frequency: 230 V a.c./ 1 / 50 Hz
  • Current (full load): 1.7 Amps
  • Power consumption: 385 Watts
  • Fuse rating: 5 Amps
  • Power cable (pre-wired): 1.5 metres

Product Attachments

View FileStuart Turner Monsoon Standard Single    Size: (1 MB)