Developed in response to demand by people hampered by a lack of mains water pressure, Pumps UK have brought out this compact booster assembly.
Fully automatic in function, straightforward in installation, and reliable in operation, make this a highly useful piece of water engineering kit for those customers who are concerned over mains water inflow to their premises. Control is by a ‘Genyo’ composite pressure sensing and activating device.
Although aimed at the domestic water boosting market, this unit is equally at home in small, light commercial premises where water usage is at similar levels.
Input voltage is standard domestic at 230-1ph and would require a standard fused plug (5 amp) to operate its powerful 600 watt driving motor.
Connection arrangement is simple : The input (lower) connection is fitted to the storage tank ; The output (upper) connection to the pipework that serves the premises. Both are standard 1” bspf on the unit.
The pump body and impeller is brass, and the pump/motor shaft in stainless steel, for minimum contamination.
Pump output varies from a high pressure of 3.5 bar down to less than ½ bar - depending on the flow required. A ‘typical’ performance being 15 l/min @ 2 bar - adequate for most general domestic needs. Max water temp 40°C
Current lead time is 1-2 weeks - For help with potential installations please talk to Pumps UK Service on 01322 292 415
- PCB Pressure pump
- Pressure Controller
- Fitted Valves and Elbow
- 250 x 250 Plastic base